Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.2;

import { AccessControl } from "AccessControl.sol";
import { Address } from "Address.sol";
import "Ownable.sol";
import "SafeERC20.sol";
import "ReentrancyGuard.sol";



/// @title XYDexAggregator helps swap assets through designated routes of pools stated in calls array
/// @notice Use `multiswap` to swap assets by `calls` array and receiver address
contract XYDexAggregator is AccessControl, ReentrancyGuard {

    using SafeERC20 for IERC20;

    /* ========== STRUCTURE ========== */

    // Call describes a swap for XYDexAggregator
    struct Call {
        // the contract to execute the swap
        address target;
        // prefix of the swap bytecode
        bytes prefix;
        // suffix of the swap bytecode
        bytes suffix;
        // from token address
        address fromToken;
        // to token address
        address toToken;
        // amount of the token to swap (optional, use non-zero value to specified amount to swap if needed)
        uint256 amountIn;
    }

    /* ========== STATE VARIABLES ========== */
    bytes32 public constant ROLE_OWNER = keccak256("ROLE_OWNER");
    bytes32 public constant ROLE_AGGREGATOR_ADAPTOR = keccak256("ROLE_AGGREGATOR_ADAPTOR");
    address public constant ETHER_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    // Store the whitelisted swap routers.
    mapping(address => bool) public routerWhitelist;

    receive() external payable {}

    /// @dev Constuctor sets deployer as owner. Also, owner is the admin of the role aggregator.
    constructor() {
        _setRoleAdmin(ROLE_OWNER, ROLE_OWNER);
        _setRoleAdmin(ROLE_AGGREGATOR_ADAPTOR, ROLE_OWNER);
        _setupRole(ROLE_OWNER, msg.sender);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    /// @notice Get balance of the desired account address of the given token
    /// @param token The token address to be checked
    /// @param account The address to be checked
    /// @return The token balance of the desired account address
    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (address(token) == ETHER_ADDRESS) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    /// @notice Infinite approval to spender address if needed
    /// @param token the token contract address to execute `approve` method
    /// @param spender the address allowed to spend
    function approveIfNeeded(IERC20 token, address spender) internal {
        if (address(token) != ETHER_ADDRESS && token.allowance(address(this), spender) == 0) {
            token.safeApprove(spender, 2**256 - 1);
        }
    }

    /* ========== WRITE FUNCTIONS ========== */

    /// @notice Set aggregatorAdaptor address.
    /// @param aggregatorAdaptor The adaptor address. This multicaller should only be used
    /// by `aggregatorAdaptor`.
    function setAggregatorAdaptor(address aggregatorAdaptor) external onlyRole(ROLE_OWNER) {
        require(Address.isContract(aggregatorAdaptor), "AggregatorAdaptor should be a contract");
        _setupRole(ROLE_AGGREGATOR_ADAPTOR, aggregatorAdaptor);
    }

    /// @notice Add/remove a swap router to/from the whitelist. It can only be called by the owner.
    /// @param router The swap router address.
    /// @param isAdding `True` if router is being added and `False` being removed.
    function setRouter(address router, bool isAdding) external onlyRole(ROLE_OWNER) {
        require(Address.isContract(router), "Router should be a contract");
        routerWhitelist[router] = isAdding;
        emit SetRouter(router, isAdding);
    }

    /// @notice Multi-swap through array of calls by sequence and then transfer final swapped token to receiver
    /// @dev Since the output amount of every swap will differ based on exchange conditions, the amount to swap
    /// of next `Call` needs dynamically changed based on the output of the previous swap. In order to support this,
    /// pre-generated bytecode only contains partial call signature excluding input amount param. The complete
    /// calldata will be packed in runtime.
    /// @param calls the array of calls to swap through different pools (See definition of `Call` in this file)
    /// @param receiver the address to receive final swapped token
    function multiswap(
        Call[] memory calls,
        address payable receiver
    )
        public
        payable
        onlyRole(ROLE_AGGREGATOR_ADAPTOR)
        nonReentrant
        returns (uint256 blockNumber, bytes[] memory returnData)
    {
        blockNumber = block.number;
        returnData = new bytes[](calls.length);

        require(calls.length > 0, "Invalid calls length");
        if (calls[0].fromToken == ETHER_ADDRESS) {
            require(msg.value == calls[0].amountIn, "Invalid msg.value");
        } else {
            IERC20(calls[0].fromToken).safeTransferFrom(msg.sender, address(this), calls[0].amountIn);
        }

        // `calls` contain only swap actions
        uint256 amountIn;
        for(uint256 i = 0; i < calls.length; i++) {
            // Check: call target must be a whitelisted swap router.
            require(routerWhitelist[calls[i].target], "ERR_ROUTER_NOT_IN_WHITELIST");

            approveIfNeeded(IERC20(calls[i].fromToken), calls[i].target);

            if (calls[i].amountIn > 0) {
                amountIn = calls[i].amountIn;
            }
            uint256 value = 0;
            bytes memory callData;
            if (calls[i].fromToken == ETHER_ADDRESS) {
                value = amountIn;
                callData = abi.encodePacked(calls[i].prefix, calls[i].suffix);
            } else {
                callData = abi.encodePacked(calls[i].prefix, amountIn, calls[i].suffix);
            }
            uint256 balance = uniBalanceOf(IERC20(calls[i].toToken), address(this));
            bytes memory ret = Address.functionCallWithValue(calls[i].target, callData, value, "Multicall multiswap: call failed");
            amountIn = uniBalanceOf(IERC20(calls[i].toToken), address(this)) - balance;
            returnData[i] = ret;
        }

        Call memory lastCall = calls[calls.length - 1];
        if (lastCall.toToken == ETHER_ADDRESS) {
            receiver.transfer(address(this).balance);
        } else {
            uint256 balance = IERC20(lastCall.toToken).balanceOf(address(this));
            IERC20(lastCall.toToken).safeTransfer(receiver, balance);
        }
    }

    /* ========== EVENTS ========== */

    event SetRouter(address indexed router, bool isAdding);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "IAccessControl.sol";
import "Context.sol";
import "Strings.sol";
import "ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "IERC20.sol";
import "Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

{
  "evmVersion": "istanbul",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "libraries": {
    "XYDexAggregator.sol": {}
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"router","type":"address"},{"indexed":false,"internalType":"bool","name":"isAdding","type":"bool"}],"name":"SetRouter","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ETHER_ADDRESS","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ROLE_AGGREGATOR_ADAPTOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ROLE_OWNER","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"target","type":"address"},{"internalType":"bytes","name":"prefix","type":"bytes"},{"internalType":"bytes","name":"suffix","type":"bytes"},{"internalType":"address","name":"fromToken","type":"address"},{"internalType":"address","name":"toToken","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"}],"internalType":"struct XYDexAggregator.Call[]","name":"calls","type":"tuple[]"},{"internalType":"address payable","name":"receiver","type":"address"}],"name":"multiswap","outputs":[{"internalType":"uint256","name":"blockNumber","type":"uint256"},{"internalType":"bytes[]","name":"returnData","type":"bytes[]"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"routerWhitelist","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"aggregatorAdaptor","type":"address"}],"name":"setAggregatorAdaptor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"router","type":"address"},{"internalType":"bool","name":"isAdding","type":"bool"}],"name":"setRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

60806040523480156200001157600080fd5b50600180556200003160008051602062001dac833981519152806200008d565b6200006c7fd639b7d96542147b109f34196c8d87a8b1aa8715082b224299043911fbae07b160008051602062001dac8339815191526200008d565b6200008760008051602062001dac83398151915233620000d8565b62000188565b600082815260208190526040808220600101805490849055905190918391839186917fbd79b86ffe0ab8e8776151514217cd7cacd52c909f66475c3af44e129f0b00ff9190a4505050565b620000e48282620000e8565b5050565b6000828152602081815260408083206001600160a01b038516845290915290205460ff16620000e4576000828152602081815260408083206001600160a01b03851684529091529020805460ff19166001179055620001443390565b6001600160a01b0316816001600160a01b0316837f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d60405160405180910390a45050565b611c1480620001986000396000f3fe6080604052600436106100e15760003560e01c806391d148541161007f578063c3c6467411610059578063c3c646741461027c578063cf1d21c01461029c578063d547741f146102dc578063d8d4218a146102fc576100e8565b806391d1485414610226578063969da00014610246578063a217fddf14610267576100e8565b806336568abe116100bb57806336568abe1461018257806363cbb145146101a257806386ac3a7b146101d25780638ad682af146101f2576100e8565b806301ffc9a7146100ed578063248a9ca3146101225780632f2ff15d14610160576100e8565b366100e857005b600080fd5b3480156100f957600080fd5b5061010d6101083660046118d1565b610330565b60405190151581526020015b60405180910390f35b34801561012e57600080fd5b5061015261013d366004611895565b60009081526020819052604090206001015490565b604051908152602001610119565b34801561016c57600080fd5b5061018061017b3660046118ad565b610369565b005b34801561018e57600080fd5b5061018061019d3660046118ad565b610395565b3480156101ae57600080fd5b5061010d6101bd3660046116de565b60026020526000908152604090205460ff1681565b3480156101de57600080fd5b506101806101ed3660046116de565b610418565b3480156101fe57600080fd5b506101527f9f4e1c871d5fdd0aee1cd182666698a4492b24c6832aac230d07b11046af5a8981565b34801561023257600080fd5b5061010d6102413660046118ad565b6104ca565b610259610254366004611732565b6104f5565b604051610119929190611a47565b34801561027357600080fd5b50610152600081565b34801561028857600080fd5b506101806102973660046116fa565b610c9e565b3480156102a857600080fd5b506102c473eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee81565b6040516001600160a01b039091168152602001610119565b3480156102e857600080fd5b506101806102f73660046118ad565b610d77565b34801561030857600080fd5b506101527fd639b7d96542147b109f34196c8d87a8b1aa8715082b224299043911fbae07b181565b60006001600160e01b03198216637965db0b60e01b148061036157506301ffc9a760e01b6001600160e01b03198316145b90505b919050565b60008281526020819052604090206001015461038681335b610d9d565b6103908383610e01565b505050565b6001600160a01b038116331461040a5760405162461bcd60e51b815260206004820152602f60248201527f416363657373436f6e74726f6c3a2063616e206f6e6c792072656e6f756e636560448201526e103937b632b9903337b91039b2b63360891b60648201526084015b60405180910390fd5b6104148282610e85565b5050565b7f9f4e1c871d5fdd0aee1cd182666698a4492b24c6832aac230d07b11046af5a896104438133610381565b813b6104a05760405162461bcd60e51b815260206004820152602660248201527f41676772656761746f7241646170746f722073686f756c64206265206120636f6044820152651b9d1c9858dd60d21b6064820152608401610401565b6104147fd639b7d96542147b109f34196c8d87a8b1aa8715082b224299043911fbae07b183610eea565b6000828152602081815260408083206001600160a01b038516845290915290205460ff165b92915050565b600060607fd639b7d96542147b109f34196c8d87a8b1aa8715082b224299043911fbae07b16105248133610381565b600260015414156105775760405162461bcd60e51b815260206004820152601f60248201527f5265656e7472616e637947756172643a207265656e7472616e742063616c6c006044820152606401610401565b6002600155845143935067ffffffffffffffff8111156105a757634e487b7160e01b600052604160045260246000fd5b6040519080825280602002602001820160405280156105da57816020015b60608152602001906001900390816105c55790505b50915060008551116106255760405162461bcd60e51b8152602060048201526014602482015273092dcecc2d8d2c840c6c2d8d8e640d8cadccee8d60631b6044820152606401610401565b73eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee6001600160a01b03168560008151811061066457634e487b7160e01b600052603260045260246000fd5b6020026020010151606001516001600160a01b031614156106f357846000815181106106a057634e487b7160e01b600052603260045260246000fd5b602002602001015160a0015134146106ee5760405162461bcd60e51b8152602060048201526011602482015270496e76616c6964206d73672e76616c756560781b6044820152606401610401565b61076b565b61076b33308760008151811061071957634e487b7160e01b600052603260045260246000fd5b602002602001015160a001518860008151811061074657634e487b7160e01b600052603260045260246000fd5b6020026020010151606001516001600160a01b0316610ef4909392919063ffffffff16565b6000805b8651811015610b4b576002600088838151811061079c57634e487b7160e01b600052603260045260246000fd5b602090810291909101810151516001600160a01b031682528101919091526040016000205460ff166108105760405162461bcd60e51b815260206004820152601b60248201527f4552525f524f555445525f4e4f545f494e5f57484954454c49535400000000006044820152606401610401565b61087087828151811061083357634e487b7160e01b600052603260045260246000fd5b60200260200101516060015188838151811061085f57634e487b7160e01b600052603260045260246000fd5b602002602001015160000151610f65565b600087828151811061089257634e487b7160e01b600052603260045260246000fd5b602002602001015160a0015111156108d3578681815181106108c457634e487b7160e01b600052603260045260246000fd5b602002602001015160a0015191505b6000606073eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee6001600160a01b031689848151811061091557634e487b7160e01b600052603260045260246000fd5b6020026020010151606001516001600160a01b031614156109b25783915088838151811061095357634e487b7160e01b600052603260045260246000fd5b60200260200101516020015189848151811061097f57634e487b7160e01b600052603260045260246000fd5b60200260200101516040015160405160200161099c929190611959565b6040516020818303038152906040529050610a2f565b8883815181106109d257634e487b7160e01b600052603260045260246000fd5b602002602001015160200151848a85815181106109ff57634e487b7160e01b600052603260045260246000fd5b602002602001015160400151604051602001610a1d93929190611988565b60405160208183030381529060405290505b6000610a668a8581518110610a5457634e487b7160e01b600052603260045260246000fd5b60200260200101516080015130611029565b90506000610ad68b8681518110610a8d57634e487b7160e01b600052603260045260246000fd5b60200260200101516000015184866040518060400160405280602081526020017f4d756c746963616c6c206d756c7469737761703a2063616c6c206661696c65648152506110e1565b905081610afc8c8781518110610a5457634e487b7160e01b600052603260045260246000fd5b610b069190611b17565b955080888681518110610b2957634e487b7160e01b600052603260045260246000fd5b6020026020010181905250505050508080610b4390611b71565b91505061076f565b5060008660018851610b5d9190611b17565b81518110610b7b57634e487b7160e01b600052603260045260246000fd5b6020026020010151905073eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee6001600160a01b031681608001516001600160a01b03161415610bf2576040516001600160a01b038716904780156108fc02916000818181858888f19350505050158015610bec573d6000803e3d6000fd5b50610c8e565b60808101516040516370a0823160e01b81523060048201526000916001600160a01b0316906370a082319060240160206040518083038186803b158015610c3857600080fd5b505afa158015610c4c573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610c7091906118f9565b6080830151909150610c8c906001600160a01b03168883611209565b505b5050600180555090939092509050565b7f9f4e1c871d5fdd0aee1cd182666698a4492b24c6832aac230d07b11046af5a89610cc98133610381565b823b610d175760405162461bcd60e51b815260206004820152601b60248201527f526f757465722073686f756c64206265206120636f6e747261637400000000006044820152606401610401565b6001600160a01b038316600081815260026020908152604091829020805460ff191686151590811790915591519182527f09b50446349d7fd45dbe59f55204a44404c2adf607c59e9420b87535ed2454b1910160405180910390a2505050565b600082815260208190526040902060010154610d938133610381565b6103908383610e85565b610da782826104ca565b61041457610dbf816001600160a01b03166014611239565b610dca836020611239565b604051602001610ddb9291906119bf565b60408051601f198184030181529082905262461bcd60e51b825261040191600401611a34565b610e0b82826104ca565b610414576000828152602081815260408083206001600160a01b03851684529091529020805460ff19166001179055610e413390565b6001600160a01b0316816001600160a01b0316837f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d60405160405180910390a45050565b610e8f82826104ca565b15610414576000828152602081815260408083206001600160a01b0385168085529252808320805460ff1916905551339285917ff6391f5c32d9c69d2a47ea670b442974b53935d1edc7fd64eb21e047a839171b9190a45050565b6104148282610e01565b6040516001600160a01b0380851660248301528316604482015260648101829052610f5f9085906323b872dd60e01b906084015b60408051601f198184030181529190526020810180516001600160e01b03166001600160e01b031990931692909217909152611422565b50505050565b6001600160a01b03821673eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee1480159061100e5750604051636eb1769f60e11b81523060048201526001600160a01b03828116602483015283169063dd62ed3e9060440160206040518083038186803b158015610fd457600080fd5b505afa158015610fe8573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061100c91906118f9565b155b15610414576104146001600160a01b038316826000196114f4565b60006001600160a01b03831673eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee141561106157506001600160a01b038116316104ef565b6040516370a0823160e01b81526001600160a01b0383811660048301528416906370a082319060240160206040518083038186803b1580156110a257600080fd5b505afa1580156110b6573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906110da91906118f9565b90506104ef565b6060824710156111425760405162461bcd60e51b815260206004820152602660248201527f416464726573733a20696e73756666696369656e742062616c616e636520666f6044820152651c8818d85b1b60d21b6064820152608401610401565b843b6111905760405162461bcd60e51b815260206004820152601d60248201527f416464726573733a2063616c6c20746f206e6f6e2d636f6e74726163740000006044820152606401610401565b600080866001600160a01b031685876040516111ac919061193d565b60006040518083038185875af1925050503d80600081146111e9576040519150601f19603f3d011682016040523d82523d6000602084013e6111ee565b606091505b50915091506111fe828286611618565b979650505050505050565b6040516001600160a01b03831660248201526044810182905261039090849063a9059cbb60e01b90606401610f28565b60606000611248836002611af8565b611253906002611ae0565b67ffffffffffffffff81111561127957634e487b7160e01b600052604160045260246000fd5b6040519080825280601f01601f1916602001820160405280156112a3576020820181803683370190505b509050600360fc1b816000815181106112cc57634e487b7160e01b600052603260045260246000fd5b60200101906001600160f81b031916908160001a905350600f60fb1b8160018151811061130957634e487b7160e01b600052603260045260246000fd5b60200101906001600160f81b031916908160001a905350600061132d846002611af8565b611338906001611ae0565b90505b60018111156113cc576f181899199a1a9b1b9c1cb0b131b232b360811b85600f166010811061137a57634e487b7160e01b600052603260045260246000fd5b1a60f81b82828151811061139e57634e487b7160e01b600052603260045260246000fd5b60200101906001600160f81b031916908160001a90535060049490941c936113c581611b5a565b905061133b565b50831561141b5760405162461bcd60e51b815260206004820181905260248201527f537472696e67733a20686578206c656e67746820696e73756666696369656e746044820152606401610401565b9392505050565b6000611477826040518060400160405280602081526020017f5361666545524332303a206c6f772d6c6576656c2063616c6c206661696c6564815250856001600160a01b03166116519092919063ffffffff16565b80519091501561039057808060200190518101906114959190611879565b6103905760405162461bcd60e51b815260206004820152602a60248201527f5361666545524332303a204552433230206f7065726174696f6e20646964206e6044820152691bdd081cdd58d8d9595960b21b6064820152608401610401565b80158061157d5750604051636eb1769f60e11b81523060048201526001600160a01b03838116602483015284169063dd62ed3e9060440160206040518083038186803b15801561154357600080fd5b505afa158015611557573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061157b91906118f9565b155b6115e85760405162461bcd60e51b815260206004820152603660248201527f5361666545524332303a20617070726f76652066726f6d206e6f6e2d7a65726f60448201527520746f206e6f6e2d7a65726f20616c6c6f77616e636560501b6064820152608401610401565b6040516001600160a01b03831660248201526044810182905261039090849063095ea7b360e01b90606401610f28565b6060831561162757508161141b565b8251156116375782518084602001fd5b8160405162461bcd60e51b81526004016104019190611a34565b606061166084846000856110e1565b949350505050565b803561036481611bb8565b600082601f830112611683578081fd5b813567ffffffffffffffff81111561169d5761169d611ba2565b6116b0601f8201601f1916602001611aaf565b8181528460208386010111156116c4578283fd5b816020850160208301379081016020019190915292915050565b6000602082840312156116ef578081fd5b813561141b81611bb8565b6000806040838503121561170c578081fd5b823561171781611bb8565b9150602083013561172781611bd0565b809150509250929050565b60008060408385031215611744578182fd5b823567ffffffffffffffff8082111561175b578384fd5b818501915085601f83011261176e578384fd5b813560208282111561178257611782611ba2565b61178f8182840201611aaf565b82815281810190858301885b8581101561185a578135880160c0818e03601f190112156117ba578a8bfd5b6117c460c0611aaf565b6117cf878301611668565b81526040820135898111156117e2578c8dfd5b6117f08f8983860101611673565b8883015250606082013589811115611806578c8dfd5b6118148f8983860101611673565b60408301525061182660808301611668565b606082015261183760a08301611668565b608082015260c0919091013560a08201528452928401929084019060010161179b565b5050809750505061186c818801611668565b9450505050509250929050565b60006020828403121561188a578081fd5b815161141b81611bd0565b6000602082840312156118a6578081fd5b5035919050565b600080604083850312156118bf578182fd5b82359150602083013561172781611bb8565b6000602082840312156118e2578081fd5b81356001600160e01b03198116811461141b578182fd5b60006020828403121561190a578081fd5b5051919050565b60008151808452611929816020860160208601611b2e565b601f01601f19169290920160200192915050565b6000825161194f818460208701611b2e565b9190910192915050565b6000835161196b818460208801611b2e565b83519083019061197f818360208801611b2e565b01949350505050565b6000845161199a818460208901611b2e565b820184815283516119b2816020808501908801611b2e565b0160200195945050505050565b60007f416363657373436f6e74726f6c3a206163636f756e7420000000000000000000825283516119f7816017850160208801611b2e565b7001034b99036b4b9b9b4b733903937b6329607d1b6017918401918201528351611a28816028840160208801611b2e565b01602801949350505050565b60006020825261141b6020830184611911565b600060408201848352602060408185015281855180845260608601915060608382028701019350828701855b82811015611aa157605f19888703018452611a8f868351611911565b95509284019290840190600101611a73565b509398975050505050505050565b604051601f8201601f1916810167ffffffffffffffff81118282101715611ad857611ad8611ba2565b604052919050565b60008219821115611af357611af3611b8c565b500190565b6000816000190483118215151615611b1257611b12611b8c565b500290565b600082821015611b2957611b29611b8c565b500390565b60005b83811015611b49578181015183820152602001611b31565b83811115610f5f5750506000910152565b600081611b6957611b69611b8c565b506000190190565b6000600019821415611b8557611b85611b8c565b5060010190565b634e487b7160e01b600052601160045260246000fd5b634e487b7160e01b600052604160045260246000fd5b6001600160a01b0381168114611bcd57600080fd5b50565b8015158114611bcd57600080fdfea2646970667358221220ac335ed9baf89d9d92cbb0b58388d24e92637658562af72bc23fdfe281365ce364736f6c634300080200339f4e1c871d5fdd0aee1cd182666698a4492b24c6832aac230d07b11046af5a89

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